Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 60)

60 K2 Media Client System Guide September 7, 2006
Chapter 3 System connections and configuration
5. Select the Link tab and then click Identify Adapter . The Identify Adapter dialog box
opens.
6. Click Start .
7. Verify that the LED is blinking next to the physical network port corresponding to
that adapter software name, as follows:
8. Continue with the next procedure “Create the Control Team” .
Software adapter name Physical port
…MT Dual Port Server Adapter 1st (left) port on the motherboard
…MT Dual Port Server Adapter #2 2nd (right) port on the mother board
…MT Dual Port Server Adapter #3 1st (upper) port on the dual Ethernet adapter
…MT Dual Port Server Adapter #4 2nd (lower) port on the dual Ethernet adapter