Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 96)

96 K2 Media Client System Guide September 7, 2006
Chapter 5 Managing K2 client system software
6. Create a backup image using the K2 Media Client Recovery CD. Refer to the K2
Media Client Service Manual.
Installing K2 software
Except as noted in the preceding sections, when you receive your K2 Media Client,
you do not need to install software. The system has the most recent software
pre-installed at the factory.
If you are upgrading software on a K2 Media Client, refer to the K2 Media Client
Release Notes for that version of software for specific software upgrade procedures.
If you are upgrading external storage K2 Media Clients, you must use the proper
sequence and upgrade all K2 Media Servers and K2 Media Clients to the same
software version. Upgrade K2 Media Servers first, then K2 Media Clients. Refer to
K2 Storage System Release Notes for the complete explanation of the rules that apply
to upgrading software on the K2 Storage System.
Before upgrading K2 software, you should make a recovery disk image. Refer to the
K2 Media Client Service Manual for disk image information.
Re-installing Grass Valley software
NOTE: Follow these instructions if you need to re-install software. If you are
upgrading to a new release version, see the Release Notes for the latest information
on installation procedures. For more information on recovery procedures, see
“Backup and recovery strategies” on page 98 .
At the opening screen of the install wizard, select Repair , then use the following
instructions for the type of software you are installing: