Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 65)

September 7, 2006 K2 Media Client System Guide 65
Create the FTP Team
5. Select the check box for …Adapter #2 and …Adapter #4 . Click Next .
6. Select Switch Fault Tolerance . Click Next .
7. Click Finish and wait a few seconds for the adapters to be teamed.
8. Open the Modify Team dialog box as follows:
a. In Device Manager | Network Adapters, right-click TEAM: FTP TEAM and select
Properties . The Properties dialog box opens.
b. Select the Settings tab.
c. Click Modify Team . A dialog box opens.