beautypg.com

Installing control point software – Grass Valley K2 Media Client System Guide Oct.10 2006 User Manual

Page 95

background image

September 7, 2006

K2 Media Client System Guide

95

Installing Control Point software

Installing Control Point software

If you are using the Grass Valley control point PC, it comes from the factory with
software installed, so you should not need to install software.

If you intend to use a PC that you own as a control point PC, make sure that you
choose a PC that meets system requirements for supporting Control Point software.
Refer to

“Control point PC system requirements” on page 139

. Then install software

and configure as follows:

1. Set up Windows user accounts according to your site’s security policies. The

accounts and passwords that match the factory default accounts on K2 systems are
as follows:

• Administrator:adminK2

• K2admin:K2admin

• K2user:K2user

2. Install the following software, as it is required to support K2 Control Point

software:

• MSXML 4.0

• .NET Framework 1.1

You can find this software on the K2 System Software CD.

3. Install K2 Control Point PC software, as referenced earlier in this chapter.

4. It is recommended that you install the following software, so that you can

accomplish a broad range of operational and administrative tasks from the control
point PC:

• Java Real Time Environment Update 7 or higher. Required for the HP Ethernet

Switch configuration interface, which is used for K2 Storage Systems (external
storage).

• QuickTime 7, for local viewing of exported media. You can find this on the K2

System Software CD.

• Adobe Acrobat Reader, for reading documentation from the K2 Documentation

CD.

5. Install NetCentral and its supporting software, such as the following:

• NetCentral Manager

• Basic IIS 6.0 package

• SNMP (Windows Components)

Refer to the NetCentral User Guide for complete installation and configuration
instructions.

NetCentral is required and included as part of the product for external storage K2
Media Clients and the K2 Storage System. NetCentral is optional but
recommended for internal storage K2 Media Clients.

This manual is related to the following products: