Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 110)

110 K2 Media Client System Guide September 7, 2006
Chapter 7 External Storage
Installing the Multi-Path Bus Driver...
Success
Installing the Device Specific Module...
Success
Installing the Multi-Path Device Driver...
Success (but need a reboot)
7. Restart the K2 Media Client.
8. After restart, to verify that the software is installed, on the Windows desktop
right-click My Computer and select Manage . The Computer Management window
opens.
9. In the left pane select Device Manager .
10.In the right pane open the System devices node and verify that GVG ISCSI
Multi-Path Device Specific Module is listed.
Adding K2 Media Clients to the K2 Storage System
For each of your K2 Media Clients, use the procedures in this section to configure for
operation using the K2 Storage System as the shared media storage.
Before beginning with these procedures, make sure the K2 Storage System and the
K2 Media Clients are prepared as specified in the sections earlier in this chapter.
Cabling must be complete, K2 Media Clients must be communicating on the control
network, and the K2 Storage System must have a viable media file system.