Grass Valley K2 Media Client System Guide Oct.10 2006 User Manual
Page 115
September 7, 2006
K2 Media Client System Guide
115
Configuring a K2 Media Client for the K2 Storage System
File System Client
Configuration
This page connects the K2
Media Client as a media file
system client to the K2
Media Server taking the role
of media file system server.
If there are redundant K2
Media Servers, both are
listed on this page as file
system servers.
Verify that the K2 Media Client is connecting to the correct K2 Media
Server or Servers, as follows:
•
For Level 1, the client connects to the L1 device.
•
For Level 2, the client connects to the only server.
•
For Level 2R, the client connects to server A as file system server
1 and server B as file system server 2.
•
For Level 3, the client connects to server 1.
•
For Level 3R, the client connects to server 1A as file system
server 1 and server 1B as file system server 2.
Refer to the K2 Storage System Instruction Manual to identify servers.
Click
Check
. When the wizard reports that the configuration check is
successful, click
Next
.
On this page…
Do this…