Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 111)

September 7, 2006 K2 Media Client System Guide 111
Configuring a K2 Media Client for the K2 Storage System
Configuring a K2 Media Client for the K2 Storage System
Configure a K2 Media Client as follows:
1. On the K2 configuration control point PC, open the K2 System Configuration
application. A login dialog box opens.
2. Log in to the K2 System Configuration application with the correct administrator
account. By default this as follows:
• Username: administrator
• Password: adminK2
Refer to the security topic elsewhere in this manual for more information about
administrator accounts and logging in to applications.
3. In the K2 System Configuration application tree view, verify that the K2 Storage
System is correctly defined.You should see the correct number of K2 Media
Clients. If the correct number of K2 Media Clients is not currently added to the K2
Storage System, you can add or remove clients now (before clients are configured),
as follows:
• Select the top node of the storage system and click the Add Device button
• Select a unconfigured K2 Media Client and click the Remove button.
4. Select the top K2 Media Client.
5. Click the Configure button. The K2 Media Client Configuration wizard