Grass Valley K2 Media Client System Guide Oct.10 2006 - Manual (Page 62)

62 K2 Media Client System Guide September 7, 2006
Chapter 3 System connections and configuration
Click Next .
5. Select the check box for …Adapter and …Adapter #3 . Click Next .
6. Select Switch Fault Tolerance . Click Next .
7. Click Finish and wait a few seconds for the adapters to be teamed.
8. Open the Modify Team dialog box as follows:
a. In Device Manager | Network Adapters, right-click Intel® Advanced Network
Services Virtual Adapters #2 (make sure it is the adapter identified as a Virtual
adapter) and select Properties . The Properties dialog box opens.