Chapter 7 external storage – Grass Valley K2 Media Client System Guide Oct.10 2006 User Manual
Page 114
114
K2 Media Client System Guide
September 7, 2006
Chapter 7 External Storage
Database Client
Configuration
This page connects the K2
Media Client as a media
database client to the K2
Media Server taking the role
of media database server. If
there are redundant K2
Media Servers, both are
listed on this page as
database servers.
Verify that the K2 Media Client is connecting to the correct K2 Media
Server or Servers, as follows:
•
For Level 1, the client connects to the L1 device.
•
For Level 2, the client connects to the only server.
•
For Level 2R, the client connects to server A as database server 1
and sever B as database server 2.
•
For Level 3, the client connects to server 1.
•
For Level 3R, the client connects to server 1A as database server
1 and sever 1B as database server 2.
Refer to the K2 Storage System Instruction Manual to identify servers.
If there are multiple FTP servers, the K2 System Configuration
application automatically assigns the K2 Media Client to a FTP server to
provide optimum FTP bandwidth across the system.
Click
Check
. When the wizard reports that the configuration check is
successful, click
Next
.
On this page…
Do this…