Grass Valley GV STRATUS Playout v.2.0 - Manual (Page 45)

45
GV STRATUS Playout
Operator Manual
5 Click Create. The name of the device that you created should be highlighted in the
Devices list.
6 Copy the key in the Ready to Connect section.
7 Complete the registration through the card’s or application’s interface.
• For the SSP-3801 card, use the card’s web interface to view its System Identity
settings and register the card. For more information, see the SSP-3801 Installation
& Configuration Guide.
• For the File Processing Node, see Converting media using the File Processing Node
application , on page 69.
• For the GV STRATUS Playout Gateway, see Registering media and importing
schedules using the GV STRATUS Playout Gateway , on page 59.
Once the card or application is registered, the Ready to Connect section disappears
from the Device Details pane. The device account remains in a pending state until the
registration is completed from the card’s or application’s side. If the registration has not
been completed after 5 minutes, the account is deleted.
8 If you are registering a SSP-3801 card, the device must be assigned to a channel. In the
Assigned Channel list, click the channel you want to assign to the card.
The device is created with default values. To change the values, see Viewing and
updating device details , on page 45.
Viewing and updating device details
Most of the information listed under Device Details is obtained from the card or application
registered with the device.
To update the device details for a card:
1 In the top menu, click Settings.
2 Click the Device Settings tab.
3 In the Devices list, click the name of the device that you want to update.
4 In the Assigned Channel list, click the channel you want to assign to the SSP-3801 card.
If the device is registered with an application, the channel is not required.
5 In the Device Name field, type a name for the device as you want it to appear on the
various pages.
6 In the Location box, type a label which can be used to identify the card’s or
application’s location or any other useful label such as the Densité 3 frame ID if the
device is an SSP-3801 card (optional).
7 Under Synchronization, the buttons indicate whether the device is synchronized with
GV STRATUS Playout. To synchronize a device that is disabled, click the Enabled button.
When the button is blue, the device is synchronized.
8 Click Update Device.
Viewing the status of a device
The SSP-3801 cards feature a comprehensive list of alarms that can raise an alert for the
occurrence of an event, a change of status, or of a specific parameter value. These alarms
can be configured with different alarm levels. When the card is registered as a device, the