Loading playlists, 9 – playlist mode – Teac HS-2000 User Manual

Page 83

TASCAM HS-2000

9 – Playlist mode

5. Touch the

button to open a pull-up menu.

6. Touch the

EDIT NAME

button in the pull-up menu

to open the

PLAYLIST NAME

screen.

NOTE

If the loaded playlist is selected, the

EDIT NAME

button

in the pull-up menu cannot be selected.

7. Edit the playlist name. Follow the procedures in

“Editing project names” on page 40.

8. Touch the

Enter

button on the

PLAYLIST NAME

screen or press the DATA dial to confirm the project

name and return to the

PLAYLIST

screen.

Loading playlists

You can load a playlist (JPPA PPL file) that is in the folder

of the current session.

The path when viewing the card on a computer will be as

follows:

{Card drive name}:\{Project name}\{Session name}\{_

playlists}\{Playlist file}

NOTE

You cannot load a playlist file that is not in the current

session.

1. Press the PROJECT key on the front panel to open the

PROJECT

screen.

2. Touch the w button for the project that contains the

playlist you want to load to open the session selection

screen.

If the selected project is not the current project, a pop-

up window appears confirming that you want to load

it. Touch the

button.

3. Touch the w button for the session that contains the

playlist you want to load to open the playlist selection

screen.

If it is not the current session, a pop-up window

appears confirming that you want to load it. Touch the

button.

4. Select the playlist that you want to load.
5. Touch the

button on the playlist selection

screen to open a pull-up menu.

6. Touch the

LOAD

button in the pull-up menu.

NOTE

You can also load a playlist by touching its w button.

7. When a confirmation pop-up appears, touch the

button or press the DATA dial.

After loading completes, the Home Screen opens.