Teac HS-2000 - Manual (Page 53)

TASCAM HS-2000
53
7 – Timeline mode
Saving AES31 editing information
You can save the current timeline as an AES31 file. The
saved file is created in the current session folder.
CAUTION
When you edit the timeline, save the AES31 editing
information where necessary. If you do not save it,
changes will be lost if other AES31 editing information is
loaded, the card is removed, or the unit is turned off.
If you have not saved the information after editing, a
“*” mark will be shown on the AES31 file name display
button.
When a “*” is shown, if you load other AES31 editing
information, create new AES31 editing information,
or change the operation mode, for example, a pop-up
message asking if you want to save the current AES31
editing information will appear.
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the AES31 file name display button on the
Home Screen to open a pull-down menu.
3. When you touch the SAVE button on the pull-down
menu, the information will be saved on the selected
card.
While saving, a progress status pop-up appears.
When saving is complete, the pop-up window will
disappear.
Naming and saving AES31 editing
information
You can name and save the current timeline as an AES31
file. The created file is saved in the current session folder.
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the AES31 file name display button on the
Home Screen to open a pull-down menu.
3. Touch the
SAVE AS
button in the pull-up menu to
open the AES31 NAME screen where you can input
the AES31 data file name.
Input the file name. Follow the procedures in “Editing
project names” on page 40.