Teac HS-2000 - Manual (Page 54)

54
TASCAM HS-2000
7 – Timeline mode
4. Touch the
Enter
button on the
AES31 NAME
screen or press the DATA dial to save the data with the
input name.
While saving, a progress status pop-up appears.
When saving is complete, the pop-up window will
disappear.
NOTE
If a file with the same name already exists, a pop-up
window opens to confirm that you want to overwrite the
existing file. Touch the OK button to overwrite existing
file, or touch the
CANCEL
button to return to the
AES31
NAME
screen.
Creating new AES31 editing
information
You can create a new AES31 file in the current session
(loaded session).
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the AES31 file name display button on the
Home Screen to open a pull-down menu.
3. Touch the CREATE AES31 button on the pull-down
menu item to open the
AES31 NAME
screen where
you can name the AES31 editing data file.
Input the file name. Follow the procedures in “Editing
project names” on page 40.
NOTE
You can also create a new AES31 file by touching the
CREATE AES31 button on the AES31 file selection screen.
4. Touch the
Enter
button or press the DATA dial on
the
AES31 NAME
screen.