Teac HS-2000 - Manual (Page 59)

TASCAM HS-2000
59
7 – Timeline mode
Setting the editing start (IN) point
1. Press the HOME key on the front panel to open the
Home Screen.
2. Touch the
EDIT MODE
button to enter the edit
mode.
3. Use the m/, keys (or other controls) to locate the
timeline cursor to the position (time) where you want
editing to start.
4. Touch the
SET/SELECT
button to open a pull-up
menu.
5. Touch the SET IN button in the pull-up menu to set
the editing start (IN) point.
The IN mark ( ) will appear in the mark display area at
the current position.
Setting the editing end (OUT) point
6. Use the m/, keys (or other controls) to locate the
timeline cursor to the position (time) where you want
editing to end.
7. Touch the
SET/SELECT
button to open a pull-up
menu.
8. Touch the
SET OUT
button in the pull-up menu to
set the editing end (OUT) point.
The OUT mark ( ) will appear in the mark display area
at the current position.
The interval shown in light blue between the IN (
) and OUT ( ) marks will be affected by editing
operations.
Clearing the start and end (OUT) points
1. Touch the
SET/SELECT
button to open a pull-up
menu.
2. Touch the
CLEAR
button in the pull-up menu. When
a confirmation pop-up appears, touch the
OK
button
or press the DATA dial.
The current IN and OUT points are removed, and the
IN ( ) and OUT ( ) marks disappear