Teac HS-2000 - Manual (Page 150)

150
TASCAM HS-2000
18 – Specifications
General
Recording media
Compact Flash cards
File system
FAT32 (4 GB or more)
FAT16 (2GB or less)
File formats
BWF (Broadcast Wave)
WAV (Waveform Audio)
Number of channels
2 channels
Quantization bit rates
16-bit, 24-bit
Sampling frequencies
44.1/47.952/48/48.048/88.2/96/176.4/192 kHz
(47.952/48.048: 48 kHz ±0.1% pull-down/pull-up)
Clock references
INTERNAL, WORD IN, VIDEO IN, DIGITAL IN
Timecode frames
23.976, 24, 25, 29.97DF, 29.97NDF, 30DF, 30NDF
Inputs and outputs
Analog audio inputs and outputs
The error for nominal and maximum levels is ±1 dB for all
input and output jacks except the PHONES jack.
ANALOG IN (LINE) connectors (L/R)
Connectors: XLR-3-31 (1: GND, 2: HOT, 3: COLD)
Input impedance: 4.3 kΩ
Nominal input level:
+4 dBu (1.23 Vrms) ±1 dB/–20 dBu (0.0775 Vrms) ±1 dB
(+4 dBu/–20 dBu selectable)
(+6 dBu only when set to Max +15 dBu)
(+6 dBu only when Digital Ref. Level is set to -9 dB)
Maximum input level (selectable):
+15 dBu (4.36 Vrms) (D. Ref:–9 dBFS, A. Input: +6 dBu)
+18 dBu (6.16 Vrms) (D. Ref:–14 dBFS, A. Input: +4 dBu)
+20 dBu (7.75 Vrms) (D. Ref:–16 dBFS, A. Input: +4 dBu)
+22 dBu (9.76 Vrms) (D. Ref:–18 dBFS, A. Input: +4 dBu)
+24 dBu (12.3 Vrms) (D. Ref:–20 dBFS, A. Input: +4 dBu)
-6 dBu
(0.388 Vrms) (D. Ref: -14 dBFS, A. Input: -20 dBu)
-4 dBu (0.489 Vrms) (D. Ref: -16 dBFS, A. Input: -20 dBu)
-2 dBu (0.616 Vrms) (D. Ref: -18 dBFS, A. Input: -20 dBu)
0 dBu (0.775 Vrms) (D. Ref: -20 dBFS, A. Input: -20 dBu)
D. Ref: Digital Ref. Level setting
A. Input: Analog Input Ref. Lvl setting
ANALOG OUT (LINE) connectors (L/R)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω or less
Nominal output level:
+4 dBu (1.23 Vrms) ±1 dB/–20 dBu (0.0775 Vrms) ±1 dB
(+4 dBu/–20 dBu selectable)
(+6 dBu only when Digital Ref. Level is set to -9 dB)
Maximum output level (selectable):
+15 dBu (4.36 Vrms) (D. Ref:–9 dBFS, A. Output: +6 dBu)
+18 dBu (6.16 Vrms) (D. Ref:–14 dBFS, A. Output: +4 dBu)
+20 dBu (7.75 Vrms) (D. Ref:–16 dBFS, A. Output: +4 dBu)
+22 dBu (9.76 Vrms) (D. Ref:–18 dBFS, A. Output: +4 dBu)
+24 dBu (12.3 Vrms) (D. Ref:–20 dBFS, A. Output: +4 dBu)
-6 dBu
(0.388 Vrms) (D. Ref: -14 dBFS, A. Output: -20 dBu)
-4 dBu (0.489 Vrms) (D. Ref: -16 dBFS, A. Output: -20 dBu)
-2 dBu (0.616 Vrms) (D. Ref: -18 dBFS, A. Output: -20 dBu)
0 dBu (0.775 Vrms) (D. Ref: -20 dBFS, A. Output: -20 dBu)
D. Ref: Digital Ref. Level setting
A. Output: Analog Output Ref. Level setting
ANALOG OUT (MONITOR) connectors (L/R)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω or less
Nominal output level:
When reference level set to –9 dB: +6 dBu (1.55 Vrms)
When reference level set to any value other than –9 dB: +4
dBu (1.23 Vrms)
Maximum output level (selectable):
+15 dBu (4.36 Vrms) (D. Ref:–9 dBFS, A. Output: +6 dBu)
+18 dBu (6.16 Vrms) (D. Ref:–14 dBFS, A. Output: +4 dBu)
+20 dBu (7.75 Vrms) (D. Ref:–16 dBFS, A. Output: +4 dBu)
+22 dBu (9.76 Vrms) (D. Ref:–18 dBFS, A. Output: +4 dBu)
+24 dBu (12.3 Vrms) (D. Ref:–20 dBFS, A. Output: +4 dBu)
D. Ref: Digital Ref. Level setting
A. Output: Analog Output Ref. Level setting
PHONES jack
Connector: standard 6.3mm (1/4”) stereo jack
Maximum output level: 45 mW + 45 mW or more
(THD+N 0.1% or less, into 32 Ω)