Teac HS-2000 - Manual (Page 43)

TASCAM HS-2000
43
5 – Projects
4. Touch the
MAKE SESSION
button.
5. When a confirmation pop-up appears, touch the OK
button or press the DATA dial.
While a session is being created, a progress status
pop-up appears. When session creation completes, the
pop-up disappears.
NOTE
Immediately after creation, the new session becomes •
the current (loaded) session.
On the • session selection screen, the icon to the left
of the currently loaded session has the letter "C" and is
yellow.
Loading sessions
1. Press the PROJECT key on the front panel to open the
PROJECT
screen.
2. Touch the w button for the project that contains the
session that you want to load to open the session list.
If this project is not the current project, a pop-up
window appears confirming that you want to load it.
Touch the
OK
button.
3. Select the session that you want to load.
4. Touch the
MENU
button on the
SESSION
screen to
open a pull-up menu.
5. Touch the
LOAD
button in the pull-up menu.
6. When a confirmation pop-up appears, touch the
OK
button or press the DATA dial.
After loading completes, the Home Screen opens.
NOTE
On the session selection screen, the icon to the left of
the currently loaded session has the letter "C" and is yellow.
Rebuilding sessions
You should rebuild a session whenever there is an
inconsistency between the unit's session management
file and the audio files. This can occur when an audio file
has been deleted from the unit via FTP, for example.
1. Press the PROJECT key on the front panel to open the
PROJECT
screen.
2. Touch the w button for the project that contains the
session that you want to rebuild to open the session
selection screen.
If the selected project is not the current project, a pop-
up window appears confirming that you want to load
it. Touch the
OK
button.
3. Select the session that you want to rebuild.
Touch the
MULTI SELECT
button to enable the
selection of multiple sessions.
4. Touch the MENU button on the session selection
screen to open a pull-up menu.
One session selected
Multiple sessions selected
5. Touch the REBUILD button in the pull-up menu.
6. When a confirmation pop-up appears, touch the
OK
button or press the DATA dial.
During rebuilding, a progress status pop-up appears.
When rebuilding completes, the pop-up disappears.
NOTE
You can also rebuild a session from that session’s take •
selection screen.
If you do not select a session on the Session screen, •
the entire current project will be rebuilt.