Teac HS-2000 - Manual (Page 109)

TASCAM HS-2000
109
11 – Internal settings
Changing the IP Address, Subnet Mask and Default
Gateway settings
Touch the corresponding area on the ETHERNET page
of the REMOTE SETUP screen to display a setting
adjustment screen.
Each unit uses three digits, but for values of two digits •
or fewer, leading zeroes can be omitted.
The largest (first) unit is selected when the screen •
opens.
After selecting a unit, touching a number button clears •
the numbers in the unit and enters only that digit.
Enter additional numbers as you would with a calcu-
lator.
Touch the dot (“ • . ”) button to move the selection to the
next unit.
Example:
First unit selected 192. 168. 1. 1
Input 1, 2, 3, 4 234. 168. 1. 1 First "1" is discarded
Input " . " 192. 168. 1. 1 Moves to next unit.
Changing the password setting
Touch the Password Change button on the ETHERNET
page of the REMOTE SETUP screen to open the
CHANGE PASSWORD where you can set the password.
Up to nine characters can be entered.
See “13 – Other functions” for details about password
use.