Teac HS-2000 - Manual (Page 128)

128
TASCAM HS-2000
13 – Other functions
If recording starts when mirror recording is disabled, •
the following messages are shown.
1 When mirror recording is disabled for any reason
other than 2 or 3 below.
2 A CF card is not compatible with UDMA
3 A CF card has not been formatted by this unit
If space runs out or an error occurs on either of the CF •
cards during recording when set to Mirror, recording
will stop on the card with no space remaining or
where the error occurred. Recording of the current
file to the other card will also stop, but recording
will immediately continue with the next take as a
new file. Then, a message will be shown and the CF
card remaining space display buttons will appear as
follows:
1 When one CF card has run out of space
Remaining time buttons
2 If a recording error has occurred on one of the CF
cards
Remaining time buttons