Teac HS-2000 - Manual (Page 46)

46
TASCAM HS-2000
6 – Operation Modes
This unit has the following four operation modes.
Timeline mode 0
Timeline mode provides a linear working
environment similar to a tape recorder. In timeline
mode, two tracks can be recorded and played back.
Marks, including BWF-J CUE points, can also be
edited.
Take mode 0
Take mode uses takes (files) as recording and
playback units. Two tracks can be recorded and one
or two tracks can be played back.
Marks, including BWF-J CUE points, can also be
edited.
Playlist mode 0
Playlist mode provides a playlist playback function.
One or two tracks can be played back.
On-air mode 0
This mode plays back audio files (that match the
unit's set sampling frequency) in the root folder of
the current card.
Two tracks can be played back.
Timeline mode functions
The following functions can be used in timeline mode.
Two-channel recording and playback possible at all •
compatible sampling frequencies (Fs)
Confidence monitoring allows the audio being
•
recorded to be played back simultaneously (when
the sampling frequency is 44.1kHz, 48kHz or
48kHz±0.1% and the REC Mode is Single)
Mirror recording function using both CF card slots
•
Recording and playback synchronized to timecode •
Bounce function can make a single file from a desig- •
nated section of the timeline
Marks, including BWF-J CUE points, can be set,
•
managed, edited and used for playback
AES31 standard compatibility allows exchange of
•
data with other devices
In timeline mode, playback units are called “regions,” and
their extent is shown in the track area of the Home Screen.
NOTE
Because the AES31 file standard does not support
176.4kHz or 192kHz sampling frequencies, editing
information for projects created using these sample rates
will be saved using a TASCAM original format, based on
AES31. This format might not be compatible with other
products.
Take mode functions
The following functions can be used in take mode.
Two-channel recording and playback possible at all •
compatible sampling frequencies (Fs)
Confidence monitoring allows the audio being
•
recorded to be played back simultaneously (when
the sampling frequency is 44.1kHz, 48kHz or
48kHz±0.1% and the REC Mode is Single)
Mirror recording function using both CF card slots
•
Auto cue, auto ready and incremental play functions •
Flash start playback possible using TASCAM •
RC-HS32PD (3 pages of 32 keys each) RC-HS20PD
(5 pages of 20 keys each) or other remote control
devices (all sold separately)
Marks, including BWF-J CUE points, can be set,
•
managed, edited and used for playback