Teac HS-2000 - Manual (Page 113)

TASCAM HS-2000
113
11 – Internal settings
ANALOG Ref LVL ADJUST page
You can make fine adjustments to the analog input and
output reference levels for each channel independently.
Use an IN X knob (“X”is L or R) to adjust the analog
input level of the corresponding channel, and use an
OUT X knob to adjust the analog output level of the
corresponding channel.
Touch a knob to select it, making its area yellow, and use
the DATA dial to adjust the level.
Turn the dial to adjust it in 0.1dB intervals, and press
and turn the dial to adjust it in 1dB intervals. The value is
shown beneath each knob.
Setting range: –6dB to +6dB (default: 0dB)
If the
INPUT SOURCE
on the
INPUT
tab of the
AUDIO I/O
screen is set to Digital instead of Analog,
the corresponding knob will not be shown and “Analog IN
not selected” will appear in the menu area.
Not set to analog input
Backup/Startup page
You can import and export system files, save and load user
settings, and set the startup mode using the
Backup/
Startup
page of the
SYSTEM SETUP
screen.
System Backup 8
Use the Export button to write all System Backup data •
(including User Preset settings) to the selected card.
Only one set of System Backup data can be saved on a
card.
Use the Import ALL button to load all System Backup •
data (including User Preset settings) from the selected
card and overwrite the built-in memory with it.
The imported User Preset settings are immediately •
applied to the operation of the unit.
Use the Import User button to import only the User •
Preset settings from the System Backup data on the
selected card and overwrite the User Preset in the
built-in memory with it.
Imported User Preset settings are not immediately •
applied to the operation of the unit. After importing,
touch the LOAD Preset User button to apply the User
Preset settings.
If there are no System Backup files, a pop-up window •
indicating that the import cannot be performed
appears.
Save User Preset 8
Press the Save button save the current setting values
as the User Preset in the built-in memory.
Load Preset
8
Touch the User button to load the User Preset
settings or the Factory button to load the Factory
Preset settings (the values when first shipped new).
Startup MODE 8
Last Setting : Load previous settings when turned on
User Preset : Load User Preset settings when
turned on
Factory Preset : Load Factory Preset settings when
turned on