Teac HS-2000 - Manual (Page 127)

TASCAM HS-2000
127
13 – Other functions
Setting button appearance •
REC mode setting Buttons
Single
Mirror
Mirror (set, but recording
not possible* or Mirror
recording disabled**)
*Conditions that make recording impossible:
The space remaining on the current CF card is insuffi- •
cient.
The currently selected CF card is not mounted. •
The CF card set as the current media is not a •
compatible media type (PIO mode).
The format of the current CF card is not compatible (not •
FAT16 or FAT32).
A CF card already has a take with a name that matches •
the NEXT TAKE NAME setting and is numbered
999. (“----” is shown for the number on the NEXT TAKE
NAME screen.)
The total number of entries in the current folders •
of both CF cards (total numbers of files and folders)
exceeds the system limitation.
Recording/Editing has been repeated in timeline •
mode, and there is not enough memory available for
managing region and editing history, so recording
cannot be performed. ("RecLimit" appears in the CF
card remaining space display button.)
**Conditions that disable mirror recording
The remaining space on the mirroring (not currently •
selected) CF card is insufficient. (Recording is also
impossible if the remaining space on the currently
selected CF card is exhausted*)
The mirroring CF card is not mounted. (Recording is •
also impossible if the currently selected CF card is not
mounted.*)
The mirroring CF card is not compatible media •
type. (PIO mode) (Recording is also impossible if the
currently selected CF card is not compatible.*)
The mirroring CF card format is not compatible (not •
FAT16 or FAT32). (Recording is also impossible if the
currently selected CF card format is not compatible.*)
The CF card is not compatible with UDMA. •
One or both of the CF cards has not been formatted by •
this unit (not formatted with the recommended cluster
size).
If any of the above conditions applies, mirror recording will not e
occur, but recording to the current media will proceed.
NOTE
If set to Mirror, a project/folder identical to the current •
project/folder of the current CF card is created on the
mirroring CF card.
If you start recording when set to Mirror, takes with the •
same name are recorded into the matching project/
folder on both CF cards.
If you retake when set to Mirror, only the take on the •
current CF card is deleted. The take on the mirroring
CF card is not deleted.
When set to Mirror, if the current CF card cannot •
be recorded to, recording is impossible, even if the
mirroring CF card has space available.
When mirror recording, if the time counter display •
mode is TOTAL REMAIN, the remaining recordable
time for the CF card with the least remaining space is
shown. If one of the CF cards runs out of space during
mirror recording, the remaining recordable time for
the CF card that continues recording is shown.
Various messages
If the REC Mode is changed to Mirror when Mirror is •
disabled, the following messages are shown.
1 When one of the CF cards cannot be recorded to
2 If a CF card is not compatible with UDMA
3 If one of the CF cards has not been formatted by
this unit