2 − names and functions of parts – Teac HS-2000 User Manual
Page 12
12
TASCAM HS-2000
2 − Names and functions of parts
d
SHIFT key
When stopped, in playback standby or during
playback, press and hold this key and:
Press the
•
.
key to move to the previous mark,
and resume the same playback state.
Press the
•
/
key to move to the next mark, and
resume the same playback state.
Press the
•
m
[
] key or ,[
] key to
search at high speed.
Press the
•
JOG [SHUTTLE] key to activate the shuttle
operation mode.
Press the
•
STOP [RETAKE] key to retake the recording
(erasing the last recorded take).
Press the
•
CALL [CHASE] key to turn timecode
synchronization ON/OFF.
f
JOG [SHUTTLE] key/indicator
Use to enable jog and shuttle dial operation.
Press this key to enable the jog operation mode of the
JOG/SHUTTLE dial. When this mode is enabled, this
indicator lights.
Press this key while pressing the SHIFT key to enable
the shuttle operation mode of the JOG/SHUTTLE dial.
When this is enabled, this indicator blinks.
Press this key again to disable either mode.
g
JOG/SHUTTLE dial
When in jog operation mode, turn this to change the
playback position by a corresponding amount.
When in shuttle operation mode, turn this to adjust
the playback speed according to the degree of
rotation.
In shuttle operation mode, returning to the original
position restores the transport status to how it was before
shuttle playback.