Teac HS-2000 - Manual (Page 57)

TASCAM HS-2000
57
7 – Timeline mode
Deleting an AES31 file
1. Press the PROJECT key on the front panel to open the
PROJECT screen.
2. Touch the w button of the project containing the
AES31 file to be deleted to open the session selection
screen.
If the selected project is not the current project, a pop-
up window appears confirming that you want to load
it. Touch the
OK
button.
3. Touch the w button of the project containing the
AES31 file to be deleted to open the AES31 file
selection screen.
If it is not the current session, a pop-up window
appears confirming that you want to load it. Touch the
OK
button.
4. Select the AES31 file that you want to delete.
The background of the selected AES31 file becomes
yellow.
5. Touch the
MENU
button to open a pull-up menu.
6. Touch the
DELETE
button in the pull-up menu.
NOTE
If the loaded AES31 file is selected, the DELETE button
on the pull-up menu is disabled
7 Touch the
OK
button or press the DATA dial when the
confirmation pop-up appears.
When deleting is complete, the pop-up window will
disappear.