Super Systems PC Configurator 2 - Manual (Page 70)

Super Systems Inc. Page 70 of 201 Configurator Manual #4562 Rev D
This will either enable or disable the web change feature, which will allow changes to be made
over the web page for the 9120 controller. Select either a 0 (Web Change Disable) or a 1 (Web
Change Enable).
O2 Mode:
This value will allow the operator to select the oxygen mode. The options are: % with
control, monitor, or offset with control.
Input 1:
This value will display the Input 1 type. This value cannot be changed from this screen.
Input 2:
This value will display the Input 2 type. This value cannot be changed from this screen.
Input 3:
This value will display the Input 3 type. This value cannot be changed from this screen.
Loop 1 PV:
This value will display the Loop 1 PV type. This value cannot be changed from this screen.
Loop 2 PV:
This value will display the Loop 2 PV type. This value cannot be changed from this screen.
Communications Setup
*** This menu option is a combination of the menu option Port Setup and IP Address under the
Configurator-9200 Drop-Down Menu . ***
Slave Instrument Setup
*** This menu option is the same as the menu option Slave Instrument Setup under the
Configurator-9220 Drop-Down Menu . ***
Analog Input Setup
*** This menu option is the same as the menu option Analog Input Setup under the
Configurator-9200 Drop-Down Menu . ***