Super Systems PC Configurator 2 - Manual (Page 157)

Super Systems Inc. Page 157 of 201 Configurator Manual #4562 Rev D
This value allows the user to set the TC to be part of the group of Load TCs that can hold the
program if it is out of band. The values are active or not active, shown as blank.
TC 1 – 24:
This value allows the user to manually turn the T/C from active to not active, shown as blank,
to be part of the group of TCs that can hold the program if it’s out of band.
Load TC Alarm ON Delay:
This is the amount of time the alarm will delay before turning on. The range is 0 to 500,
measured in seconds.
Port Setup
Configurator – Port Setup menu option
Port setup is the communications definitions for the controller. Please contact Super Systems
Inc. for more information regarding port setup. It is
strongly recommended that none of the
settings be modified without technical support from Super Systems Inc. Clicking on any of the
values will display an input box that will allow the user to modify the current settings.