Super Systems PC Configurator 2 - Manual (Page 144)

Super Systems Inc. Page 144 of 201 Configurator Manual #4562 Rev D
This option will allow the user to set a descriptive name for the furnace.
Date and Time:
This option will display the date and time on the 9215 controller. This date/time can be
modified by the user.
PVT Type:
This option will let the user set the PVT type for the controller. The options are: % Carbon,
Nitrider, or FNC.
Probe Source:
This option will allow the user to set the probe source for the 9215 controller. The options are:
Input or PLC.
Furnace TC Control:
This option will allow the user to set the TC control for the furnace. The options are: Input or
PLC.
Mode:
This option will let the user set the mode of the controller. The options are: H2 &
Disassociation or H2 & Nitrider Potential.
H2 RS-232 Comms:
This option will allow the user to determine if there will be RS-232 communications with the H2.
The options are: Yes or No.
Flow Meter Type:
This option will allow the user to set the flow meter type for the controller. The options are:
PLC Analog or SSi RS485.
Control Mode:
This option will allow the user to set the control mode for the controller. The options are:
Monitor or Control.
LP3 Control:
This option will allow the user to set the control for the LP3. The options are: None, Pressure
Control, Not Defined, or Temperature.
Temperature Controller:
This option will allow the user to define the temperature control for the 9215 controller. The
options are: Internal Loop 2 or SPP TC Instrument.
N2 Ctrl by Valve 1:
This option will determine if the N2 can be controlled by valve 1. The options are: No or Yes.
NH3 Ctrl by Valve 2:
This option will determine if the NH3 can be controlled by valve 2. The options are: No or Yes.