Tc extension correction curves – Super Systems PC Configurator 2 User Manual

Page 132

Text mode
Original mode

Super Systems Inc.

Page 132 of 201

Configurator Manual #4562 Rev D

TC Extension Correction Curves

Configurator – TC Extension Correction Curves menu option

This menu option will allow the user to set up to three TC correction curves for the 9200
controller. Clicking on the “click” value for a curve will display the curve edit form.

Note: If the

first “Temperature” value and the first “Error” value are both zero, then the curve will not be

set

. The user can enter up to ten “Temperature”/“Error” combinations. The range for the

“Temperature” field is –300 to 9999. The range for the “Error” field is –30.000 to 30.000.

Configurator – Curve edit form