Super Systems PC Configurator 2 - Manual (Page 149)

Super Systems Inc. Page 149 of 201 Configurator Manual #4562 Rev D
This option will allow the user to set the maximum flow rate for the valve.
Custom Curves
*** This menu option is the same as the Curve Entry menu option under the Configurator-9200
Drop-Down Menu . ***
Alternate PID Setup
*** This menu option is the same as the Alternate PID Setup menu option under the
Configurator-9200 Drop-Down Menu . ***
SSi Analog Input Setup
*** This menu option is the same as the SSi Analog Input Setup menu option under the
Configurator-9200 Drop-Down Menu . ***
SSi Configuration and Calibration
*** This menu option is the same as the SSi Configuration and Calibration menu option under
the Configurator-9200 Drop-Down Menu . ***
ADAM Module Offset Correction
*** This menu option is the same as the ADAM Module Offset Correction menu option under
the Configurator-9200 Drop-Down Menu . ***
Aux Setpoint Configuration
*** This menu option is the same as the Aux Setpoint Configuration menu option under the
Configurator-9200 Drop-Down Menu . ***
TC Extension Correction Curves
*** This menu option is the same as the TC Extension Correction Curves menu option under
the Configurator-9200 Drop-Down Menu . ***