Super Systems PC Configurator 2 - Manual (Page 57)

Super Systems Inc. Page 57 of 201 Configurator Manual #4562 Rev D
Set Menu Security
*** This menu option is the same as the menu option Set Menu Security under the
Configurator-9200 Drop-Down Menu . ***
SSi Analog Input Setup
Configurator – SSi Analog Input Setup menu option
The SSi Analog Input Setup menu option allows the user an input selection of five inputs per
module. There are eight modules available. It is configurable for voltage of T/C (universal
input), and it is typically used for Load T/Cs and Auxiliary Flow Meters. Clicking on any of the
values will display an input box from which the user can select the input type from a drop-down
list with the following values:
B NNM
160 mV
C R 80 mV
E S 40 mV
J T 20 mV
K 2.5 volts 4-20 mA/124Ω
N 1.25 volts 4-20 mA/62Ω