Super Systems PC Configurator 2 - Manual (Page 148)

Super Systems Inc. Page 148 of 201 Configurator Manual #4562 Rev D
Valve Setup
Configurator – Valve Setup menu option
This option will allow the user to set up the valves for the 9215 controller. There is a choice of
four valves: Nitrogen Valve, Ammonia Valve, D.A. (Disassociated Ammonia) Valve, or
Hydrogen Valve.
Zero Scale:
The Zero Scale option will allow the user to set the zero scale for the valve.
Full Scale:
This option will allow the user to set the full scale for the vale.
Trim Enable:
This option will allow the user to set the trim enable option for the valve.
Target Setpoint:
The Target Setpoint option will allow the user to set the target setpoint for the valve.
Trim Range:
This option will allow the user to set the trim range for the valve.
Zero SP Scale:
This option will allow the user to set the zero scale for the setpoint.
Full SP Scale:
This option will allow the user to set the full scale for the setpoint.
Valve Max: