Super Systems PC Configurator 2 User Manual

Page 135

Text mode
Original mode

Super Systems Inc.

Page 135 of 201

Configurator Manual #4562 Rev D

value (the

and the

from

PID

). This could be applicable in an atmosphere loop, where the

rate won’t have much effect.
Once a set of values has been accepted, the user can press the Done button to exit the screen.
The accepted values can be viewed on the

PID Loop Setup

menu option

. Note: Once the

screen is closed out, the PID settings values will be lost

. To populate these values again,

another calibration routine will need to be run.