Super Systems PC Configurator 2 - Manual (Page 107)

Super Systems Inc. Page 107 of 201 Configurator Manual #4562 Rev D
The relay setpoints can only be used once the relays are assigned as such in the Relay
Assignments menu option.
The range is –32768 to 32767.
Analog Input Setup
The 9200 dual loop controller has three analog inputs. Each of the inputs comes with a factory
default configuration dependent on the application It can be modified prior to shipment to your
facility or in the field by a technician or qualified/trained person with the proper security code.
Analog Input Terminals
Analog Input 1 – terminals 31 and 32
Analog Input 2 – terminals 29 and 30
Analog Input 3 – terminals 27 and 28
Configurator - Analog Input Setup menu option
Factory Default configurations:
Carbon:
INPUT 1 INPUT 2 INPUT 3
Input Type 1.25 volts S K
Filter Time 8 8 8