Super Systems PC Configurator 2 - Manual (Page 49)

Super Systems Inc. Page 49 of 201 Configurator Manual #4562 Rev D
Configurator-9005 Drop-Down Menu
Recipe 1 – Recipe 4
The first four menu items – Recipe 1 , Recipe 2 , Recipe 3 , and Recipe 4 – will display the
currently running recipes, if any, on each of the four programmers for the 9005 controller.
Recipe 1 will display the recipe for programmer 1; Recipe 2 will display the recipe for
programmer 2, etc. The user has the ability to start, stop, or hold a recipe running on any of
the programmers using the first four menu options.
Configurator – Recipe 1 – Recipe 4 menu option
Slave Instruments
*** This menu option is the same as the Slave Instruments menu option under the
Configurator-9200 Drop-Down Menu . ***
Auxiliary A/I
Manual Event Control
*** This menu option is similar to the Manual Event Control menu option under the
Configurator-9200 Drop-Down Menu . ***
Event Run Program Setup
*** This menu option is the same as the menu option Event Run Program Setup under the
Configurator-9200 Drop-Down Menu , except the user can set the event run program for each of
the four programmers. ***