Super Systems PC Configurator 2 - Manual (Page 33)

Super Systems Inc. Page 33 of 201 Configurator Manual #4562 Rev D
only last for the current soak and will not be a permanent change . To cancel the
change, click on the Cancel button.
The right side of the screen contains the controller data: atmosphere actual and setpoint,
temperature actual and setpoint, Probe information, Outputs, and Inputs.
Configurator – Main screen with a recipe running
The first part is the atmosphere values and the temperature values
Configurator – Atmosphere and Temperature values
The left side is the atmosphere values. The first box contains the actual value of the
atmosphere. The second box contains the atmosphere setpoint. Clicking on this box will allow
the user to alter the setpoint.
Configurator – Edit atmosphere setpoint
Enter the new value or use the up and down arrows to select the new value and click on the
OK button to set the new atmosphere setpoint. Clicking on the Cancel button will cancel the