Super Systems PC Configurator 2 - Manual (Page 151)

Super Systems Inc. Page 151 of 201 Configurator Manual #4562 Rev D
Configurator – Active CH screen
This option will allow the user to select the active CH gas. The options are: CH 1 through CH
6.
Note: More than one gas may be selected as the active CH value .
Auto Cal Interval (min) (0 = OFF):
This option will set the auto cal interval in minutes. The range is: 0 to 9999.
Auto Zero Interval (min) (0 = OFF):
This option will set the auto zero cal interval in minutes. The range is: 0 to 9999.
Auto Data Display Time:
This is a display of the auto data time. This value cannot be modified.
Purge Time Before Cal/Zero:
This is a display of the purge time before the next calibration/zero process. This value cannot
be modified.
Gas 1/2/3/4/5/6 Type:
This option will allow the user to select the gas type for the specified gas. The options are:
None
PIC 2 A/D1 O2 Cell
PIC IR Cell 1 PIC 2 A/D3 ext Thermister
PIC IR Cell 2 PIC 1 A/D3 ext 0-5V
PIC IR Cell 3 PIC 3 A/D0 ext 0-1V
PIC IR Cell 4 PIC 3 A/D1 ext 0-1V
H2 Cell via RS232 PIC 3 A/D3 ext 0-5V
Lambda Probe via RS485
Gas 1/2/3/4/5/6 Value:
This option will display the current value for the specified gas. This value cannot be modified.
Gas 1/2/3/4/5/6 Full Scale:
This option will allow the user to set the full scale for the specified gas. The range is: 0 –
9999.
Gas 1/2/3/4/5/6 Display Decimal Place: