Super Systems PC Configurator 2 - Manual (Page 55)

Super Systems Inc. Page 55 of 201 Configurator Manual #4562 Rev D
This value will define which instrument will be the temperature instrument. The list of choices
is: Instrument 1 through Instrument 25.
Event Instrument:
This value will define which instrument will be the event instrument. The list of choices is:
Instrument 1 through Instrument 25.
Quench Instrument:
This value will define which instrument will be the quench instrument. The list of choices is:
Instrument 1 through Instrument 25.
End of Quench Event:
This value will define which event will signify the end of Quench. The list of options is: 0 to 14.
Quench Speed Event:
This value will define which event will signify the Quench Speed event. The list of options is: 0
to 14.
Quench Run Event:
This value will define which event will signify the Quench Run event. The list of options is: 0 to
14.
Default Hold Time:
This value will define the default hold time, in minutes. The range is 0 to 10000.
Deviation Alarm BO Delay:
This value will define the deviation alarm’s burnoff delay, in minutes. The range is 0 to 10000.
Clear events/end of recipe:
This value will determine whether the events will be cleared at the end of a recipe. The
possible choices are no and yes.
Passcode and Alarm
*** This menu option is the same as the Passcode and Alarm menu option under the
Configurator-9200 Drop Down Menu . ***
IP Address
*** This menu option is the same as the IP Address menu option under the Configurator-9200
Drop Down Menu . ***
Zone/Load TC Setup
*** This menu option is the same as the menu option Zone/Load TC Setup under the
Configurator-9200 Drop-Down Menu . ***