Super Systems 9205 Series - Manual (Page 84)

Series 9205 Operations Manual Rev A 83
Probe Burnoff Setup
Configurator – Probe Burnoff Setup menu option
When a probe is in a furnace, soot will collect in the end of the probe, which will have a negative effect on
the performance of the probe. Burnoffs are used to clean out the built-up carbon by burning it off of the
probe.
This menu option allows the user to modify the settings that are associated with the probe burnoff (menu
option Burnoff ).
Burnoff Time:
This is the duration of the burnoff measured in seconds. SSi recommends a 90 second burnoff, and this will
be the default value. However, it can be adjusted by the operator. Clicking on the value will allow the user
to change the value.
Configurator – Enter new burnoff value