Super Systems 9205 Series - Manual (Page 26)

Series 9205 Operations Manual Rev A 25
Log Types
The System Log tracks the startup and shutdown activity of the touch screen as well as when
communications to the controller are established.
The Alarm Log tracks all alarms—those that are internal to the controller and those that are generated by
the PLC. This log tracks the alarm generated, its start time, and its end time. This log can be useful for
helping build an alarm history.
The Cycle Log keeps track of charged loads and completed recipes. Specifically, it displays the start time
and date, completed time and date, and recipe number executed. A Utilization button can be pressed to
open a page with information on utilization based a selected date and on the amount of time that the 9205
controller has run a recipe compared to the amount of time it has not run a recipe.
Probe Manager
This option allows the user to register a probe within
the 9205 by entering its serial number. Doing so
starts a tracking history of probe burn-offs,
impedance tests, recovery time, and other probe
parameters. Trends can be monitored this way, and
the impedance of the probe can be traced to help
estimate its life expectancy.
To install a new probe, tap Install New Probe. You
will be asked for the probe serial number. Enter it
and tap OK.
When Burnoff Report is selected, a list showing
when a burnoff took place will appear, along with probe mV, temperature, and temperature change during
the burnoff. When a burnoff event is selected, a chart will show temperature changes during the burnoff
event.
When Probe Test Report is selected, a list will appear showing test parameters for the selected probe:
time: Impedance k Ω, Recovery Time, Start Temperature, Test mV, and Test Temperature. When a test event
is selected, a chart will show temperature changes during the test.
Tap Return to return to the main menu.