Super Systems 9205 Series - Manual (Page 19)

Series 9205 Operations Manual Rev A 18
Chart Sub Menu
There is a sub-menu available by putting a
finger or a stylus anywhere on the chart and
holding it there for a couple of seconds. The
sub-menu will have the following options
available: Zoom, Restore, Add Note, Data, and
Exit.
The Zoom option will allow the user to zoom in on a
particular part of the screen. Once this has been
selected, the user can take a stylus or a finger and create
a box around the desired data. Once the user releases
the stylus or finger, a zoom is no longer possible, and the
user will need to re-select the option from the sub-menu
to zoom in again.
The Restore option will back out of any zoom options that have been performed and display the chart
screen as it initially was.
The Add Note option allows the operator to enter a note on the chart, similar to writing on a paper chart.
The note shows up when the chart is printed out using the utility software included with the Series 9205
instrumentation. Pressing the Add Note option displays a screen where the operator can enter the
operator ID or initials and a note. The user has the option to enter a note using the operator interface
keyboard, where he or she will be able to type in the note; or the user can use the Signature mode, which
will allow them to write a note using a stylus.
The Data option will show the trend data as a data grid instead of the trend lines on a chart. This
functionality is exactly the same as if the user pressed the Datagrid View button - - from the chart
screen.
Exit will close out the sub-menu without selecting an item.
Pressing the red ‘X’ in the top right-hand corner of the screen will take the user back to the status screen.