Super Systems 9205 Series - Manual (Page 25)

Series 9205 Operations Manual Rev A 24
About
The About screen displays important information on
the 9205 controller that the touch screen is
communicating with. The SSi 9205 field shows the
firmware version of the controller itself. Serial
Number shows the serial number of the controller.
Interface Revision shows the current version of the
touch screen interface.
The remaining fields show versions of various DLL
(dynamic link library) files that the touch screen
software uses to operate. These fields may be
needed for troubleshooting if you need to contact
SSi for technical support.
Maintenance
From the Maintenance Status menu, you can view a list of scheduled and completed maintenance items.
Maintenance items are added from the Configuration -> Maintenance menu. See the Configuration section
on page 61 for more information.
Logs
The Logs screen will allow the user to view three
different types of logs – System, Alarms, and
Cycle.
Clicking on the button that displays the log type
(System Log, Alarm Log, or Cycle Log) will allow
the user to select the type of log file to view.
The green directional arrows will display the
previous items in the log or the next items in the
log, if the log items are longer than one screen.
The drop down list in between the directional
arrows will allow the user to select the date of the
log items to view.
The Return button will return the user to the
menu screen.