Super Systems 9205 Series - Manual (Page 190)

Series 9205 Operations Manual Rev A 189
Field Factory Default Value
Loop 1 Instrument Loop 1
Loop 2 Instrument Loop 2
Event Instrument internal
Quench Instrument Instrument 2
End of quench event 7
Quench speed event 6
Quench run event 0
Date and Time invalid
Default Hold Time 90
Deviation Alarm Delay 0
Furnace Name Batch 1 r 1 ! '
PV1 Name Temperature 1
PV2 Name Temperature 2
PV3 Name Temperature 3
Clear Events, end of recipe yes
Start Quench On recipe opcode
Quench hold event none
Quench transfer time configuration Event 0 active to event 1 active
Slave Event Boards 0
Prog 2 Loop 1 Instrument Loop 1
Prog 2 Loop 2 Instrument Loop 2
Prog 2 Event Instrument internal
Prog 2 Quench Instrument Instrument 2
Prog 2 End of quench event 7
Prog 2 Quench speed event 6
Prog 2 Quench run event 0
Prog 2 Default Hold Time 90
Prog 2 Deviation Alarm Delay 0
Prog 2 Clear Events, end of recipe yes
Prog 2 Start Quench On recipe opcode
Prog 2 Quench hold event none
Furnace transfer logic enable no
Programmer PV Select Calculated Process Variable
Quench Idle Speed 0.0
COF Matrix (edit)
COF Table (0 = disabled) 0
COF Restore value 0
CO Factor 200
H Factor 400
Programmer 1 Wait Limits
Temp Wait Limit 0
Atm Wait Limit 0.00
Programmer 2 Wait Limits