Super Systems AC20 User Manual

Page 83

R.M02 -

Maximum value of proportional band

calculated by SMART algorithm

This parameter is available only when smart function is
configured (“Sñ.Fn” [C.G01] = “Enb”)
Upper display: Gr.Hd
Lower display: Pb.Hi
Range: from “Pb.Lo” [R.M01] to 999.0%
NOTE

NOTE

NOTE: The resolution on “Pb.Hi” value is: 0.1% up to 10.0%;

1% up to 999.0

R.M03 -

Minimum value of integral time

calculated by SMART algorithm

This parameter is available only when smart function is
configured (“Sñ.Fn” [C.G01] = “Enb”)
Upper display: Gr.Hd
Lower display: ti.Lo
Range: from 00.01 mm.ss to “ti.Hi” [R.M04].

R.M04 -

Maximum value of integral time

calculated by SMART algorithm.

This parameter is available only when smart function is
configured (“Sñ.Fn” [C.G01] = “Enb”)
Upper display: Gr.Hd
Lower display: ti.Hi
Range: from “ti.Lo” [R.M03] to 20.00 mm.ss

R.M05 -

Relative gain of the secondary output

calculated by SMART algorithm.

This parameter is available only when smart function is
configured (“Sñ.Fn” [C.G01] = “Enb”) and a secondary control
output is configured.
Upper display: Gr.Hd
Lower display: rG.CL
Range: OFF = Smart algorithm does not calculate “r.Gn”

[R.D06] value.

= Smart algorithm calculates “r.Gn” [R.D06] value.

R.M06 -

Hidden group default data loading

Upper display: Gr.Hd
Lower display: dFLt.
Range: OFF = No loading data

On = loading data