Super Systems AC20 User Manual

Page 62

Run time group 3 [R.Cxx]

Run time group 3 [R.Cxx]
ALARM THRESHOLD AND HYSTERESIS VALUE

R.C01 - Manual reset of the alarms

R.C01 - Manual reset of the alarms
Upper display: Gr.3
Lower display: ñ.rSt
Range: ON/OFF
Change to ON and then depress “FUNC” key to reset/
acknowledge the alarm condition.
NOTES

NOTES

NOTES:
1) The reset/acknowledge function is always enabled but it is

possible to protect it by security code.

2) When one of the logic input is configured as alarm reset, both

actions (of "ñ.rSt" parameter and of the logic input) are active.

R.A07 - Group 1 default data loading.

R.A07 - Group 1 default data loading.
Upper display: Gr.1
Lower display: dFLt.
Range: OFF = No loading data

ON = Loading data

Run time group 2 [R.Bxx]

Run time group 2 [R.Bxx]
SMART ENABLE/DISABLE

R.B01 - SMART

R.B01 - SMART
This parameter is available when at least one control output is
configured and SMART function is enabled (“Sñ.Fn” [C.G01]=
“Enb”)
Upper display: Gr.2
Lower display: Sñrt
Range: OFF = SMART algorithm is deactivated

ON = SMART algorithm is activated

Set On or OFF to activate/deactivate the SMART algorithm.