Super Systems AC20 - Manual (Page 60)

58
Run time group 1 [R.Axx] Run time group 1 [R.Axx] Run time group 1 [R.Axx] Run time group 1 [R.Axx] Run time group 1 [R.Axx]
Set point and factor values
R.A01 - R.A01 - R.A01 - R.A01 - R.A01 - Main set point Main set point Main set point Main set point Main set point
Upper display: Gr.1
Lower display: SP
Range: from "rL" [R.E10] to "rH" [R.E11].
R.A02 - Set point 2 R.A02 - Set point 2 R.A02 - Set point 2 R.A02 - Set point 2 R.A02 - Set point 2
This parameter is available only when one of the logic inputs is
configured for SP/SP2 selection
Upper display: Gr.1
Lower display: SP2
Range: from "rL" [R.E10] to "rH" [R.E11].
3) For an easy consultation of this manual, a sheet named
"Reference parameter guide" with all the parameter
visualizations is enclosed.
The groups of run time parameters are identified by the "R"
letter followed by A, B etc.
The "code" formed by the group and the row (i.e. R.A01
where "R.A" is run time group1 and "01" is the row 1) is
reported, in the user manual, before each parameter
description and allows you to quickly find out the respective
parameter.