Super Systems AC20 User Manual

Page 31

C.E06 -

C.E06 -OUT 6 retransmission - initial scale value

OUT 6 retransmission - initial scale value

This parameter is available only when Out 6 function [C.E04] is
configured as “PV.rt” or “SP.rt”
Upper display: CnF.2
Lower display: O6.Lr
Range: From -1999 to 9999
NOTE

NOTE

NOTE: The decimal point position will be the same as the

“CnF.1 - PV.SL” [C.D02] previously selected.

C.E07 -

C.E07 -OUT 6 retransmission - full scale value

OUT 6 retransmission - full scale value

This parameter is available only when Out 6 function [C.E04] is
configured as “PV.rt” or “SP.rt”
Upper display: CnF.2
Lower display: O6.Hr
Range: From -1999 to 9999
NOTE

NOTE

NOTE: The decimal point position will be the same as the

“CnF.1 - PV.SL” [C.D02] previously selected.

C.E08 -

C.E08 -OUT 6 filter on the retransmitted value

OUT 6 filter on the retransmitted value

This parameter is available only when OUT 6 ("O6.Fn" [C.E04]) is
configured “PV.rt”.
Upper display: CnF.2
Lower display: O6.FL
Range: From 0 (no filter) to 8 seconds

NOTE

NOTE: this is a first order digital filter applied to the retransmit-
ted output value.

C.E09 -

C.E09 -OUT 7 function

OUT 7 function

Upper display: CnF.2
Lower display: O7.Fn
Range: nonE = Output not used

ñAin = Main control output (linear)
SECn = Secondary control output (linear)
PV.rt = Process variable retransmission
SP.rt = Operative set point retransmission

C.E10 - OUT 7 range

C.E10 - OUT 7 range
This parameter is available only when Out 7 ("O7.Fn" [C.E09]) is
different from "nonE".
Upper display: CnF.2
Lower display: O7.rn
Range: 0-20 = 0 to 20 mA

4-20 = 4 to 20 mA