Super Systems AC20 User Manual

Page 72

R.F02 -

R.F02 -Alarm 1 configuration

Alarm 1 configuration

This parameter is available only when OUT 1 is configured as
alarm 1 output (“O1.Fn” [C.E01] = “ALr.1”)
Upper display: Gr.6
Lower display: A1.Cn
Range: H.A.

= High alarm (outside band) with automatic reset.

L.A.

= Low alarm (inside band) with automatic reset.

H.A.Ac= High alarm (outside band) with automatic reset

and acknowledge.

L.A.Ac= Low alarm (inside band) with automatic reset

and acknowledge.

H.L.

= High alarm (outside band) with manual reset.

L.L.

= Low alarm (inside band) with manual reset.

NOTE

NOTE: When alarm configuration has been changed, the alarm
status will be cleared.

Run time group 6 [R.Fxx]

Run time group 6 [R.Fxx]
ALARM SETTING

R.F01 -

R.F01 -Alarm 1 type

Alarm 1 type

This parameter is available only when OUT 1 is configured as
alarm 1 output (“O1.Fn” [C.E01] = “ALr.1”)
Upper display: Gr.6
Lower display: A1.tP
Range: Proc = Alarm on process variable

bAnd = Band alarm on process variable
dEV

= Deviation alarm on process variable

NOTE

NOTE: When alarm type has been changed the alarm threshold

will be forced to its default value and alarm status will be
cleared.