Super Systems AC20 - Manual (Page 22)

20
Keyboard description Keyboard description Keyboard description Keyboard description Keyboard description
MENU
= is used to select a parameter group.
FUNC = When the instrument is in "normal display mode" it
changes the indication on the lower display (see
"display function").
During parameter modification, it allows you to
memorize the new value of the selected parameter
and go to the next parameter (increasing order).
MAN = When the instrument is in "normal display mode",
pushing MAN push-button for more than 1 s, it is
possible to enable or disable the manual function.
During parameter modification, it allows you to scroll
back the parameters and groups without memorizing
the new setting.
= During parameter modification, it allows you to
increase the value of the selected parameter.
During MANUAL mode, it allows you to increase the
output value.
= During parameter modification, it allows you to
decrease the value of the selected parameter.
During MANUAL mode, it allows to decrease
the output value.
TST + MAN = By pressing these keys it is possible to start the
BURNOFF function.
TST + FUNC = By pressing these keys it is possible to start the
PROBE TEST function.
+MENU = Are used to start the lamp test function (the
command is accepted when push-buttons are
kept depressed for more than 5 s and the
instrument is in normal display mode)
+FUNC or +FUNC
During parameter modification they allow you to
increase/decrease the value under modification with
higher rate.
+MAN or +MAN
During parameter modification they allow you to
jump to the max or min programmable value.