Super Systems AC20 User Manual

Page 65

R.C10 -

High threshold used when the

alarm 3 is a band alarm.

This parameter is available only when the alarm 3 is configured
as band alarm (“A3.tP” [RF.09] = “bAnd”)
Upper display: Gr.3
Lower display: bA3.h
Range: from 0 to 1000 digits.
NOTE

NOTE

NOTE: The "bA3.L" and "bA3.h" values are algebraically added
to the operative set point in order to obtain the band limits.

R.C11 -

Alarm 1 hysteresis

This parameter is available only when Out 1 is configured as
alarm output (“O1.Fn” [C.E01] = “ALr.1”)
Upper display: Gr.3
Lower display: HSA1
Range: from 1 to 200 digits

R.C12 -

Alarm 2 hysteresis

This parameter is available only when Out 2 is configured as
alarm output (“O2.Fn” [C.E02] = “ALr.2”)
Upper display: Gr.3
Lower display: HSA2
Range: from 1 to 200 digits

R.C13 -

Alarm 3 hysteresis

This parameter is available only when Out 3 is configured as
alarm output (“O3.Fn” [C.E03] = “ALr.3”)
Upper display: Gr.3
Lower display: HSA3
Range: from 1 to 200 digits

R.C14 - Group 3 default data loading

R.C14 - Group 3 default data loading
Upper display: Gr.3
Lower display: dFLt.
Range: OFF = No loading data

ON = Loading data