Super Systems AC20 - Manual (Page 68)

66
Run time group 5 [R.Exx] Run time group 5 [R.Exx] Run time group 5 [R.Exx] Run time group 5 [R.Exx] Run time group 5 [R.Exx]
AUXILIARY CONTROL PARAMETER
R.E01 - Anti reset wind up R.E01 - Anti reset wind up R.E01 - Anti reset wind up R.E01 - Anti reset wind up R.E01 - Anti reset wind up
This parameter is available when at least one control output is
configured and "Pb" [R.D01] is different from 0.
Upper display: Gr.5
Lower display: ArW
Range: from 10% to 200% of the input span.
R.E02 - Main control output low limit R.E02 - Main control output low limit R.E02 - Main control output low limit R.E02 - Main control output low limit R.E02 - Main control output low limit
This parameter is available when one control output is configured
as main output.
Upper display: Gr.5
Lower display: ñ.OLL
Range: from 0.0 % (of the output span) to ñ.OLH [R.E03]
R.D08 - Group 4 default data loading. R.D08 - Group 4 default data loading. R.D08 - Group 4 default data loading. R.D08 - Group 4 default data loading. R.D08 - Group 4 default data loading.
This parameter is not available when SMART function is
activated (parameters related to SMART function cannot be
modified).
Upper display: Gr.4
Lower display: dFLt.
Range: OFF = No loading data
ON = Loading data