Super Systems AC20 User Manual

Page 78

R.G02 -

Serial link device address

This parameter is available only when “S.L.Pr” [R.G01] is different
from "OFF".
Upper display: Gr.7
Lower display: S.L.Ad
Range: from 1 to 255
R.G03 -

R.G03 -

Serial link baud rate

This parameter is available only when “S.L.Pr” [R.G01] is different
from "OFF".
Upper display: Gr.7
Lower display: S.L.bd
Range: from 600 to 19200 baud (19200 baud is shown, on
display, as 19.20)

R.G04 -

Serial link byte format

This parameter is available only when “S.L.Pr” [R.G01] is different
from "OFF".
Upper display: Gr.7
Lower display: S.L.bF
Range: 8

= 8 bits without parity

= 8 bits + even parity

= 8 bits + odd parity

R.F13 - Group 6 default data loading.

R.F13 - Group 6 default data loading.
Upper display: Gr.6
Lower display: dFLt.
Range: OFF = No loading data

ON = Loading data

Run time group 7 [R.Gxx]

Run time group 7 [R.Gxx]
SERIAL LINK PARAMETER

R.G01 -

Serial interface protocol

Upper display: Gr.7
Lower display: S.L.Pr
Range: OFF = No serial interface

ñbUS = Modbus
jbUS = Jbus